Hello and welcome to our community! Is this your first visit?
Register
Reigster at Galaxy S3 Forums
Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 72
Like Tree20Likes

Thread: Firmware upgrade encountered an issue. PLEASE HELP! **

  1. #21
    Junior Member prasadreddy423@gmail.com's Avatar
    Join Date
    Dec 2012
    Posts
    1
    Member #
    4469

    Firmware upgrade encountered an issue. Please select recovery mode in Kies & try agai

    Hi Ollie,
    Can you please help me too with the same problem.
    Here are my ODIN details:
    ODIN Mode:
    Product Name: GT-19300
    Custom Binary Download: Yes (5 Counts)
    Current Binary: Samsung Official
    System Status: Official

    Thanking you in advance

  2. #22
    Super Moderator UltraDroid's Avatar
    Join Date
    May 2012
    Location
    Cleveland, Ohio - The North Coast
    Posts
    13,571
    Member #
    13
    Liked
    7382 times
    Device
    United States SGH-I747
    Welcome to the Forum!
    GSM Galaxy Note 3 (Black) - Straight Stock
    GSM Galaxy Note 2 (Titanium) - Rooted running Jedi X20 Rom
    GSM Galaxy Nexus (Black) - Straight Stock

    GSM Samsung Galaxy S3 (Red) - Rooted running Deadly Venom v8.0.1 Rom

  3. #23
    Junior Member RDWSR's Avatar
    Join Date
    Dec 2012
    Posts
    1
    Member #
    4566

    Alilttle Extra !HELP!

    Quote Originally Posted by Ollie View Post
    This is your stock firmware: Hotfile.com: One click file hosting: L710VPALEN_L710SPRALEN_SPR.zip

    Download it and unzip it one time using 7Zip.

    Which version of Odin are you using?

    Put your phone into download mode. Pull the battery. Reinsert it. Press and hold Volume Up+Volume Down(press in the middle)+Power Button until it reboots.

    Launch Odin by right clicking it and selecting Run as Administrator. Ensure that nothing Samsung related is running in the background of your PC. Check the Task Manager.

    Select the PDA slot in Odin and target the firmware you unzipped earlier.

    Plug your phone in to the PC using the factory supplied USB cable. Do not use hub. Odin should detect your phone. Your PC may install some drivers.

    Press start in Odin.

    Let the phone fully reboot. Perform a factory wipe.


    Sent from my GT-I9300 using Tapatalk 2


    Hey there! first time poster. I tred to root my Sprint GS3 SPH-L710 using odin v1.85. DIDNT WORK. my screen is exactly as the one posted above. i followed your steps exactly andmy phone has been rebooting now for a half hour. the screen is alll black with white letters saying "SAMSUNG" pulsating a blueish color.....i dont know what i did. i just want my phone back. ANY help is greatly appreciated

  4. #24
    Administrator CR6's Avatar
    Join Date
    May 2012
    Location
    Idaho
    Posts
    14,735
    Member #
    19
    Liked
    7781 times
    Device
    United States SCH-I535
    Welcome to the forum!
    Not sure why you're using Odin v1.85, that's a really old version. Try downloading v3.07, that's the latest version of Odin. I don't have a link for you but a simple Google Search will bring up a number of places where you can download it.
    Good luck!



    Welcome to the Galaxy S3 Forums!

    Guidelines of Conduct




  5. #25
    Super Moderator Goose306's Avatar
    Join Date
    Jun 2012
    Location
    Missoula, MT
    Posts
    1,101
    Member #
    212
    Liked
    944 times
    Device
    United States SCH-I535

    Re: Firmware upgrade encountered an issue. PLEASE HELP! **

    Quote Originally Posted by CR6 View Post
    Welcome to the forum!
    Not sure why you're using Odin v1.85, that's a really old version. Try downloading v3.07, that's the latest version of Odin. I don't have a link for you but a simple Google Search will bring up a number of places where you can download it.
    Good luck!
    Link in my sig for easy root has a download for Odin 3.07 I believe

    Tapped from my 4.2 jelly-beaned d2vzw

  6. #26
    Junior Member ImJusTae's Avatar
    Join Date
    Jan 2013
    Posts
    2
    Member #
    4646

    i have metro galaxy s3 and it doest work

    does dis work on a metro gs3 i tried n it fail please help

    Quote Originally Posted by Ollie View Post
    This is your stock firmware: Hotfile.com: One click file hosting: L710VPALEN_L710SPRALEN_SPR.zip

    Download it and unzip it one time using 7Zip.

    Which version of Odin are you using?

    Put your phone into download mode. Pull the battery. Reinsert it. Press and hold Volume Up+Volume Down(press in the middle)+Power Button until it reboots.

    Launch Odin by right clicking it and selecting Run as Administrator. Ensure that nothing Samsung related is running in the background of your PC. Check the Task Manager.

    Select the PDA slot in Odin and target the firmware you unzipped earlier.

    Plug your phone in to the PC using the factory supplied USB cable. Do not use hub. Odin should detect your phone. Your PC may install some drivers.

    Press start in Odin.

    Let the phone fully reboot. Perform a factory wipe.


    Sent from my GT-I9300 using Tapatalk 2

  7. #27
    Junior Member gh0st's Avatar
    Join Date
    Jan 2013
    Posts
    2
    Member #
    4655
    I have tryed to install the factory with odin, and am totaly unable to get past the samsung screen after the att splash page. can any one help me? i can get to my download on my phone and it loads up fine but can not get passed the samsung
    (*its the pulsating samsung from blue to white, and a blue light for a status light at the top left

  8. #28
    Junior Member gh0st's Avatar
    Join Date
    Jan 2013
    Posts
    2
    Member #
    4655
    used odin to flash clockworks and did a factory rest and wiped data, and its all good now, dont know but after 3 to 5 hours of messing with it i got it back up and working

  9. #29
    Super Moderator Goose306's Avatar
    Join Date
    Jun 2012
    Location
    Missoula, MT
    Posts
    1,101
    Member #
    212
    Liked
    944 times
    Device
    United States SCH-I535

    Re: Firmware upgrade encountered an issue. PLEASE HELP! **

    Quote Originally Posted by gh0st View Post
    used odin to flash clockworks and did a factory rest and wiped data, and its all good now, dont know but after 3 to 5 hours of messing with it i got it back up and working
    Glad to hear its working. Most likely it was the factory reset that got it going. You generally need to do that to be able to get the OS to boot fully after an ODIN flash

    Sent from my SCH-I535 using Tapatalk HD

  10. #30
    Junior Member ImJusTae's Avatar
    Join Date
    Jan 2013
    Posts
    2
    Member #
    4646
    Hi Ollie,
    Can you please help me too with the same problem.
    Here are my ODIN details:

    ODIN Mode:
    Product Name: SCH-R530M
    Custom Binary Download: Yes (10 Counts)
    Current Binary: Custom
    System Status: Offical
    QUALCOMM SECUREBOOT: ENABLE

    please help me I CANT TURN ON MY PHONE AND IT WANT WORK I REALLY NEAD HELP


 
Page 3 of 8 FirstFirst 12345 ... LastLast

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Time for an Upgrade!
    By jefflikesbagels in forum New Member Introduction & Site Assistance
    Replies: 19
    Last Post: 01-13-2013, 07:42 PM
  2. New Firmware
    By Mr_Trebus in forum Galaxy S3 General Discussion
    Replies: 6
    Last Post: 07-07-2012, 02:24 AM
  3. Replies: 5
    Last Post: 06-26-2012, 09:25 PM
  4. Samsung Galaxy S3 Gets First Official Firmware Update
    By Astrix in forum Galaxy S3 General Discussion
    Replies: 7
    Last Post: 06-16-2012, 08:30 PM
  5. Replies: 2
    Last Post: 06-12-2012, 11:11 PM

Search tags for this page

firmware upgrade encountered an issue

,

firmware upgrade encountered an issue galaxy s3

,
firmware upgrade encountered an issue please
,
firmware upgrade encountered an issue please select recovery mode in kies
,

firmware upgrade encountered an issue s3

,
firmware upgrade encountered an issue s3 i535
,
firmware upgrade encountered an issue. please select recovery mode in kies and try again
,

galaxy s3 firmware upgrade encountered an issue

,
qualcomm secure boot
,
qualcomm secureboot
,
s3 firmware upgrade encountered an issue
,
samsung galaxy s3 firmware upgrade issue
Click on a term to search for related topics.

Tags for this Thread